SLS 3D Printer
Flight 403P Series ¹
(1) Powered by Farsoon®, Farsoon reserves the right to change the technical data without notice. Farsoon®, Buildstar, Makestar® are registered trademarks of Farsoon Technologies. Last Change: 2025-02
(2) Including build plate.
*The displayed products are provided for reference purposes only.
* The actual models available may vary according to the product listings in each specific region.
Supporting Materials
PA12, PA11, PA6, Fiber-Reinforced Nylon, TPU, etc.
Build Dmiension (L*W*H) ²
400mm×400mm×540mm
Laser Power
Fiber Laser, 1×300W; Fiber Laser, 2×300W
Comprehensive Software
BuildStar, MakeStar®
Advantages
Fast Scanning System
Unique scanning algorithms and dynamic optics boost speed and efficiency.
Powerful Fiber Laser
Fiber lasers provide increased power, stability, and long-lasting performance.
Fine Details
Achieves fine details (down to 0.3mm) with better mechanical properties.
Fast Sintering Speed
Improved energy distribution boosts sintering speed and reduces processing time.
Large-Scale Manufacturing
Large build volume suitable for industrial-scale manufacturing.
Improved ROI
Improved laser systems increase production efficiency and reduce long-term costs.
Application
Learn more
Machine: FLIGHT® HT403P
Material: FS3300PA-F (PA12 with carbon black)
Build Time: 24 Hours for 4 full sets
Learn more
Machine: FLIGHT® HT403P
Material: FS3300PA-F (PA12 with carbon black)
Build Time: 150 thruster protective covers produced in one day
Learn more
Machine: FLIGHT® HT403P
Material: FS3300PA-F (PA12 with carbon black)
Build Time: 1 set produced in 24 hours, including design iteration & 3D printing
Discover Flight 403P Series System
1-Feed Cartridge
Farsoon’s 403P series are designed with exchangeable build and feed cartridges. Once the 403P system completes a build this design allows for the quick swap out of the build and feed cartridges to dramatically reduce machine down time. This robust and flexible operation enables faster production turn-around times to maximize throughput.
2-Build Cartridge
The exchangeable 403P series Build Cartridge can be paired with Farsoon’s External Cooling Station which enables controlled and inert gas protected cool down outside of the 403P machine. This controlled cool down process helps ensure dimensional accuracy and mechanical performance for the finished parts.
3-Breakout Station
The Farsoon FS04-PPS Breakout Station offers efficient powder removal and management while ensuring a clean work environment for the users. The fully enclosed operational chamber with integrated gloves eliminates direct contact with the powder. The Breakout Station includes a built-in sieving screen and powder collection container as well as an external connector for a vacuum to streamline powder handling workflow.
4-External Cooling Station
The Farsoon 403P Series External Cooling Station offers efficient cooling and maximizes production yield at the same time. It is designated for cooling the build cylinder part cake right. Once printing job completion for continuous workflow, removing the need for long cool down time inside the main system.
5-External Cooling Box
The FS-EC-02P External Cooling Box offers enhanced operational turn-around for cooling process, and maximizing machine up-time. The Cooling of the powder cake is then conducted under the inert gas atmosphere for an efficient, uniformed cooling process. Cooling the powder cake in the External Cooling Box frees the build cartridge to be used for a new build, reducing production turnaround time.
6-Powder Management System (PMS)
Integrated with multiple powder handling process including used powder recycle & storage, new powder supply, high-speed mixing, and powder sieving, the robust Powder Management System (PMS) enables a streamlined, fully-enclosed material workflow with improved throughput, lower powder refreshment rate and reduced cost per part.
7-Powder Delivery Unit (PDU)
The PMS system can also be paired with a mobile Powder Delivery Unit (PDU) which transports the prepared powder directly to the printers. Once there the PDU’s integrated pump transfers the powder into the printer’s powder feed cartridge.
Resin Materials
Ideal for appearance models, visual prototypes, smooth surface parts, and detailed validation samples.
Nylon Powder
Suitable for functional prototypes, durable end-use parts, complex geometries, and engineering applications.
Metal Powder
Designed for industrial components, mold applications, tooling, lightweight structures, and high-performance parts.
Engineering Filaments
Cost-effective options for concept models, larger parts, engineering verification, and practical production support.